selected boot device failed
Started by mehakrafiq


Rate this topic
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5


59 posts in this topic
rckid
Junior Member
**


0
29 posts 0 threads Joined: Mar 2019
03-04-2019, 01:25 AM -
#11
(03-03-2019, 11:00 AM)Mark Wrote: Dude, you don't have "Clover for UEFI booting only" ticked. Follow the written tutorial completely.
I feel like such an idiot now, lol. I selected that and MacOS started to boot, but then just came up with this:
   
Mark
hi my name is mark
*******


1
227 posts 8 threads Joined: Dec 2018
03-04-2019, 02:15 AM -
#12
Don't worry, it gets the best of us lol. Sorry for snapping a little earlier.

In BIOS, make sure that XHCI Handoff is Enabled and see if it'll boot. If it doesn't boot, look for CFG-Lock and disable it.
hi guys welcome back to my roblox tutorial.
rckid
Junior Member
**


0
29 posts 0 threads Joined: Mar 2019
03-04-2019, 09:43 AM -
#13
(03-04-2019, 02:15 AM)Mark Wrote: Don't worry, it gets the best of us lol. Sorry for snapping a little earlier.

In BIOS, make sure that XHCI Handoff is Enabled and see if it'll boot. If it doesn't boot, look for CFG-Lock and disable it.
No problem, I understand. I’ll give it a try when I get a chance.
rckid
Junior Member
**


0
29 posts 0 threads Joined: Mar 2019
03-04-2019, 03:34 PM -
#14
(03-04-2019, 02:15 AM)Mark Wrote: Don't worry, it gets the best of us lol. Sorry for snapping a little earlier.

In BIOS, make sure that XHCI Handoff is Enabled and see if it'll boot. If it doesn't boot, look for CFG-Lock and disable it.
Tried both, still same problem.

Also, thanks for all your help and patience. I’m only 14 and still trying to learn/figure out all this.
rckid
Junior Member
**


0
29 posts 0 threads Joined: Mar 2019
03-05-2019, 03:01 PM -
#15
(03-04-2019, 02:15 AM)Mark Wrote: Don't worry, it gets the best of us lol. Sorry for snapping a little earlier.

In BIOS, make sure that XHCI Handoff is Enabled and see if it'll boot. If it doesn't boot, look for CFG-Lock and disable it.
So, any ideas?
Mark
hi my name is mark
*******


1
227 posts 8 threads Joined: Dec 2018
03-06-2019, 01:31 PM -
#16
Sorry for the late reply! Try these BIOS settings:

Press DEL during boot to access BIOS. All these changes should be done on Advanced mode (hit F6 if necessary to get there).

In Advanced / USB Configuration:
Legacy USB Support: UEFI Only (Enabled or Auto might also work; do not set to Disabled)
(If you are running a newer BIOS version, there will be the option XHCI Handoff here, otherwise skip this) XHCI Handoff: enabled

In Advanced / Chipset Configuration:
Primary Graphics Adapter: PCI Express
VT-d: Disabled
Only needed if using integrated graphics: Share Memory: 128M
IGPU Multi-Monitor: Set to Disabled if you want to turn off integrated graphics when Nvidia card is installed
In Advanced / Super IO Configuration:
Serial Port: Disabled

In Security:
Secure Boot: Disabled

In Boot:
Fast Boot: Disabled
CSM(Compatibility Suport Module): Disabled

Stolen from: https://www.tonymacx86.com/threads/guide...o4.210223/
hi guys welcome back to my roblox tutorial.
Mark
hi my name is mark
*******


1
227 posts 8 threads Joined: Dec 2018
03-06-2019, 01:33 PM -
#17
Another thing to note: your GPU won't work on Mojave till Apple/Nvidia releases the Web Drivers.
hi guys welcome back to my roblox tutorial.
rckid
Junior Member
**


0
29 posts 0 threads Joined: Mar 2019
03-06-2019, 03:34 PM -
#18
(03-06-2019, 01:31 PM)Mark Wrote: Sorry for the late reply! Try these BIOS settings:

Press DEL during boot to access BIOS. All these changes should be done on Advanced mode (hit F6 if necessary to get there).

In Advanced / USB Configuration:
Legacy USB Support: UEFI Only (Enabled or Auto might also work; do not set to Disabled)
(If you are running a newer BIOS version, there will be the option XHCI Handoff here, otherwise skip this) XHCI Handoff: enabled

In Advanced / Chipset Configuration:
Primary Graphics Adapter: PCI Express
VT-d: Disabled
Only needed if using integrated graphics: Share Memory: 128M
IGPU Multi-Monitor: Set to Disabled if you want to turn off integrated graphics when Nvidia card is installed
In Advanced / Super IO Configuration:
Serial Port: Disabled

In Security:
Secure Boot: Disabled

In Boot:
Fast Boot: Disabled
CSM(Compatibility Suport Module): Disabled

Stolen from: https://www.tonymacx86.com/threads/guide...o4.210223/
I tried it, and it still gave the same error. Obviously you know more than me, but I don’t think the problem is in the BIOS, I think it’s something to do with Clover. Like I said, MacOS starts to boot (Apple logo, and progress bar) but then when it’s about halfway done, that error pops up.
Mark
hi my name is mark
*******


1
227 posts 8 threads Joined: Dec 2018
03-06-2019, 03:37 PM -
#19
Are you using USB 3 or 2? Try booting using USB 2. If that doesn't work, zip your Clover folder and upload it here.
hi guys welcome back to my roblox tutorial.
rckid
Junior Member
**


0
29 posts 0 threads Joined: Mar 2019
03-06-2019, 03:38 PM -
#20
(03-06-2019, 03:37 PM)Mark Wrote: Are you using USB 3 or 2? Try booting using USB 2. If that doesn't work, zip your Clover folder and upload it here.
Ok, ill give it a shot.

(03-06-2019, 03:37 PM)Mark Wrote: Are you using USB 3 or 2? Try booting using USB 2. If that doesn't work, zip your Clover folder and upload it here.
It says the clover zip is too large (its 1.4 mb to large)

One thing I did notice, is that your clover is v2.4k r4522, while mine is v2.4k r4895. Not sure if that makes a difference, but I thought it wouldn't hurt to let you know.


Forum Jump:


Users browsing this thread: 1 Guest(s)