Mark With Tech
Failed once booting the USB - Printable Version

+- Mark With Tech (https://markwithtech.com)
+-- Forum: Hackintosh (https://markwithtech.com/Forum-Hackintosh)
+--- Forum: Pre-Installation Help (https://markwithtech.com/Forum-Pre-Installation-Help)
+---- Forum: macOS 10.14 Mojave (https://markwithtech.com/Forum-macOS-10-14-Mojave--10)
+---- Thread: Failed once booting the USB (/Thread-Failed-once-booting-the-USB)



Failed once booting the USB - Voyager - 02-12-2019

Hi, all! New to the Hackingtosh community

My PC system:
i5-8500
Samsung 970 EVO 250GB (clean to be installed)
Samsung 960 EVO 250GB (with Windows 10)
Kingston DDR4 2666MHz 8GB x2
Asus RX570 

I followed the guide to create the USB installer. Once the USB is booted, the Apple logo appeared, loaded a bit and was yet followed by this symbol:
https://photos.app.goo.gl/efRxLUy2t2MTiKj77

Is it a problem of the installer?


Failed once booting the USB - Mark - 02-12-2019

Hey, what motherboard do you have?


RE: Failed once booting the USB - Voyager - 02-12-2019

Thank you for your instant reply.
My motherboard is Asus Prime B360-MA
I actually followed another video of BIOS settings and disabled certain items, such as Network Stack and Fast Boot. No use at all.
Then I reset all the items to optimal (default) options and booted the installer, only to have the same result as seen above.
Not sure what's going on.
Thanks!


Failed once booting the USB - Mark - 02-12-2019

Just looked some stuff up. Upgrade to the latest BIOS and try again.